Phosphate Pro Test Kit Red Sea

Instructions:

1. Using the supplied syringe, inject exactly 17 ml of water to be tested in one of the glass ampoules.

2. Insert one of the ampoules (control amp) into the outer hole of the comparator.

3. Add 10 drops of Phosphate Pro Reagent A, close the other ampoule (reaction) with the cap and shake for a few seconds.

4. Add 2 drops of Phosphate Pro Reagent B, close the amp with the cap and shake for a few seconds.

5. Remove the cap from the reaction amp and insert it into the central hole of the comparator.

6. Wait 6 minutes until the color stabilization in the reaction amp.

7. Once the test is finished, look in the 2 ampoules from above and rotate the colored disc until the two ampoules have a similar color. Note: A numbness or excessive coloring of the water sample can alter colors.

8. The phosphate level corresponding to the selected color is printed on the colored disk as indicated by the index on the side part of the body of the comparator. If necessary, estimate an average value.

9. The color in the reaction amp will remain stable for 5 minutes. Do not consider the color in the amp spent this time lasso.

High range: for phosphate levels exceeding 1ppm, dilute 2ml of water to be tested with 15ml of rO water.