pH / Alkalinity Marine Test Kit Red Sea

PH Test - Instructions for use

1. Using the supplied syringe, inject exactly 5 ml of water to be tested in the glass panel.

2. Add 3 drops of pH indicator, close the ampoule with the cap and shake for 10 seconds.

3. Once the test is finished, move the ampoule into the designated positions on the colored paper, look into the ampoule from above and compare the color with those of the paper.

Choose the pH level that corresponds to the most similar color and if necessary estimate an intermediate value.

4. The color in the reaction ampoule will remain stable for 5 minutes. Do not consider the color in the epolla spent this time lapse.

KH Test - Instructions for use

1. Using the supplied syringe, inject exactly 5 ml of water to be tested in the glass panel.

2. Add 1 drop of KH indicator and shake for 10 seconds. The sample test

It will now have the titration "departure" color as shown on the colored paper.

3. Continue to add the KH indicator a drop at a time (shake for 10 seconds after each drop) until the color in the ampoule approaches

At the "final" color of the colored paper., count the number of drops required to approach the final color.

4. Each drop of the indicator corresponds to 1 ° KH or 0.36 MEQ / L.

5. If the last drop produces a color that signals overdose compared to the final color, reduce the calculated level of 0.5 ° KH or 0.18 MEQ / L.

Note: The Alkalinity Test Kit allows a careful dosage of the Red Sea'S kh-coral coral and reef foundation b in aquariums of sea fish only.